{"entity":"Asset","count":40,"items":[{"id":"asset-bom-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multimateria","slug":"bom-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multimateria","name":"BOM for An open source extrusion bioprinter based on the E3D motion system and tool changer to enable FRESH and multimaterial bioprinting","type":"bom","format":"BOM","evidence":"Published as supplementary information of the article (10.1038/s41598-021-00931-1); Bill of materials (Supplementary Data 1, xlsx): parts with product names and supplier links, no prices.","url":"https://static-content.springer.com/esm/art%3A10.1038%2Fs41598-021-00931-1/MediaObjects/41598_2021_931_MOESM1_ESM.xlsx","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/009_MOESM1_ESM.xlsx. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-009"],"paperSlugs":["009-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multimaterial-bi"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-bom-lusobiomaker-a-low-cost-3d-bioprinter-with-multi-extrusion-and-contour-printing-capabilities-for-thermo-and-photocur","slug":"bom-lusobiomaker-a-low-cost-3d-bioprinter-with-multi-extrusion-and-contour-printing-capabilities-for-thermo-and-photocur","name":"BOM for LusoBioMaker: A low-cost 3D bioprinter with multi-extrusion and contour printing capabilities for thermo- and photocurable hydrogels towards complex tissue fabrication","type":"bom","format":"BOM","evidence":"Published as supplementary information of the article (10.1016/j.bprint.2025.e00425); Bill of materials with unit and total costs (Supporting Information, total 735.56 EUR including the Ender-3 V2).","url":"https://ars.els-cdn.com/content/image/1-s2.0-S2405886625000417-mmc1.pdf","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/048_mmc1.pdf. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-048"],"paperSlugs":["048-lusobiomaker-a-low-cost-3d-bioprinter-with-multi-extrusion-and-contour-printing-capabilities-for-thermo-and-photocurable"],"toolIds":["tool-lusobiomaker"],"toolSlugs":["lusobiomaker"],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":1},{"id":"asset-bom-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","slug":"bom-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","name":"Bom for Sidekick: A Low-Cost Open-Source 3D-printed liquid dispensing robot","type":"bom","format":"BOM","evidence":"all CAD, PCB, firmware, and documentation available on GitHub under an open license | All CAD, PCB, firmware, and documentation on GitHub (open license) | ScienceDirect HardwareX landing | Low-cost open-source 3D-printed armature-based liquid dispensing robot | HardwareX often includes complete design files + BOM; strong ‘open hardware’ fit. | https://github.com/rodolfokeesey/Liquid-Handler | https://www.sciencedirect.com/science/article/pii/S2468067222000645","url":"https://github.com/rodolfokeesey/Liquid-Handler","provenanceSource":"heuristic","notes":"","paperIds":["paper-040"],"paperSlugs":["040-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot"],"toolIds":["tool-sidekick"],"toolSlugs":["sidekick"],"repoIds":["repo-rodolfokeesey-liquid-handler"],"repoSlugs":["rodolfokeesey-liquid-handler"],"paperCount":1,"toolCount":1},{"id":"asset-bom-the-biureactor-an-open-source-3d-tissue-research-platform","slug":"bom-the-biureactor-an-open-source-3d-tissue-research-platform","name":"BOM for The ‘bIUreactor’: an open-source 3D tissue research platform","type":"bom","format":"BOM","evidence":"Published as supplementary information of the article (10.1007/s10439-024-03481-5); Parts list (Supplement 2) and itemised costs (Supplement 5).","url":"https://static-content.springer.com/esm/art%3A10.1007%2Fs10439-024-03481-5/MediaObjects/10439_2024_3481_MOESM5_ESM.pdf","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/044_MOESM2_ESM.pdf and 044_MOESM5_ESM.pdf. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-044"],"paperSlugs":["044-the-biureactor-an-open-source-3d-tissue-research-platform"],"toolIds":["tool-the-biureactor"],"toolSlugs":["the-biureactor"],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":1},{"id":"asset-cad-a-cost-effective-and-open-source-near-field-electrospinning-system-with-a-graphical-user-interface","slug":"cad-a-cost-effective-and-open-source-near-field-electrospinning-system-with-a-graphical-user-interface","name":"CAD for A cost-effective and open-source near-field electrospinning system with a graphical user interface","type":"cad","format":"CAD","evidence":"Design files are mentioned in the corpus evidence.","url":"","provenanceSource":"manifest","notes":"Explicit design-file mention is preserved even though the source URL is not recoverable from current metadata.","paperIds":["paper-003"],"paperSlugs":["003-a-cost-effective-and-open-source-near-field-electrospinning-system-with-a-graphical-user-interface"],"toolIds":["tool-low-cost-near-field-electrospinning-nfes-system"],"toolSlugs":["low-cost-near-field-electrospinning-nfes-system"],"repoIds":["repo-doi-resource-10-17605-osf-io-gk6pc"],"repoSlugs":["doi-resource-10-17605-osf-io-gk6pc"],"paperCount":1,"toolCount":1},{"id":"asset-cad-a-high-performance-open-source-syringe-extruder-optimized-for-extrusion-and-retraction-during-fresh-3d-bioprinting","slug":"cad-a-high-performance-open-source-syringe-extruder-optimized-for-extrusion-and-retraction-during-fresh-3d-bioprinting","name":"Cad for A high performance open-source syringe extruder optimized for extrusion and retraction during FRESH 3D bioprinting","type":"cad","format":"CAD","evidence":"CAD File, install guide | CAD files and install guide (HardwareX) | PMC full text | High-performance open-source syringe extruder for extrusion/retraction control in FRESH 3D bioprinting | Directly comparable to Replistruder—an open syringe/extrusion tool that enables better bioink handling. | https://doi.org/10.5281/zenodo.4119127 | https://doi.org/10.1016/j.ohx.2020.e00170","url":"https://doi.org/10.1016/j.ohx.2020.e00170","provenanceSource":"heuristic","notes":"","paperIds":["paper-004"],"paperSlugs":["004-a-high-performance-open-source-syringe-extruder-optimized-for-extrusion-and-retraction-during-fresh-3d-bioprinting"],"toolIds":["tool-replistruder-4"],"toolSlugs":["replistruder-4"],"repoIds":["repo-doi-resource-10-5281-zenodo-4119127"],"repoSlugs":["doi-resource-10-5281-zenodo-4119127"],"paperCount":1,"toolCount":1},{"id":"asset-cad-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-living-materi","slug":"cad-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-living-materi","name":"Cad for A Low-Cost, Open-Source 3D Printer for Multimaterial and High-Throughput Direct Ink Writing of Soft and Living Materials","type":"cad","format":"CAD","evidence":"CAD files, Github - instructions and software | Wide range of inks/viscosities and curing chemistries, incl. cell-laden biological materials | PMC full text + DOI | Fully DIY (not retrofit) open-source 3D printer for multimaterial, high-throughput direct ink writing | Adjacent platform for living-material printing; include if you want broader DIW-living-materials tooling. | https://github.com/weiss-jonathan/Printess-Low-Cost-3D-Printer | https://advanced.onlinelibrary.wiley.com/doi/epdf/10.1002/adma.202414971","url":"https://github.com/weiss-jonathan/Printess-Low-Cost-3D-Printer","provenanceSource":"heuristic","notes":"","paperIds":["paper-005"],"paperSlugs":["005-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-living-materials"],"toolIds":["tool-printess"],"toolSlugs":["printess"],"repoIds":["repo-weiss-jonathan-printess-low-cost-3d-printer"],"repoSlugs":["weiss-jonathan-printess-low-cost-3d-printer"],"paperCount":1,"toolCount":1},{"id":"asset-cad-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multimateria","slug":"cad-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multimateria","name":"CAD for An open source extrusion bioprinter based on the E3D motion system and tool changer to enable FRESH and multimaterial bioprinting","type":"cad","format":"CAD","evidence":"Published as supplementary information of the article (10.1038/s41598-021-00931-1); Printer components, STL and STEP files (Supplementary Data 2): 28 STL/STEP files for the syringe tools, enclosure and calibration mounts.","url":"https://static-content.springer.com/esm/art%3A10.1038%2Fs41598-021-00931-1/MediaObjects/41598_2021_931_MOESM2_ESM.zip","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/009_Printer_components_STL_and_STEP_files. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-009"],"paperSlugs":["009-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multimaterial-bi"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-cad-automated-liquid-handler-from-a-3d-printer","slug":"cad-automated-liquid-handler-from-a-3d-printer","name":"CAD for Automated Liquid Handler from a 3D Printer","type":"cad","format":"CAD","evidence":"Published as supplementary information of the article (10.1021/acs.jchemed.3c00855); Six SolidWorks part files (si_002): pipette head, holder, button, complete head assembly.","url":"https://pubs.acs.org/doi/suppl/10.1021/acs.jchemed.3c00855","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/054_ed3c00855_si_002. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-054"],"paperSlugs":["054-automated-liquid-handler-from-a-3d-printer"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-cad-commit-digital-pipette-open-hardware-for-liquid-transfer-in-self-driving-laboratories","slug":"cad-commit-digital-pipette-open-hardware-for-liquid-transfer-in-self-driving-laboratories","name":"Cad for Commit: Digital pipette: open hardware for liquid transfer in self-driving laboratories","type":"cad","format":"CAD","evidence":"GitHub | Design files and documentation on GitHub | RSC article landing + DOI | Robot-mounted 3D-printed digital pipette for liquid transfer in self-driving labs | Open hardware for accurate liquid transfer in self-driving labs; reports accuracy within ISO 8655-2 permissible error. | https://github.com/ac-rad/digital-pipette-v2 | https://pubs.rsc.org/en/content/articlelanding/2026/dd/d5dd00336a","url":"https://github.com/ac-rad/digital-pipette-v2","provenanceSource":"heuristic","notes":"","paperIds":["paper-013"],"paperSlugs":["013-commit-digital-pipette-open-hardware-for-liquid-transfer-in-self-driving-laboratories"],"toolIds":["tool-commit-digital-pipette"],"toolSlugs":["commit-digital-pipette"],"repoIds":["repo-ac-rad-digital-pipette-v2"],"repoSlugs":["ac-rad-digital-pipette-v2"],"paperCount":1,"toolCount":1},{"id":"asset-cad-development-and-implementation-of-a-significantly-low-cost-3d-bioprinter-using-recycled-scrap-material","slug":"cad-development-and-implementation-of-a-significantly-low-cost-3d-bioprinter-using-recycled-scrap-material","name":"Cad for Development and implementation of a significantly low-cost 3D bioprinter using recycled scrap material","type":"cad","format":"CAD","evidence":"GitHub, CAD files, assembly schematics | Frontiers methods article + DOI | Low-cost 3D bioprinter built from recycled scrap metal and off-the-shelf electronics; no 3D printer required to build it | Shows extreme cost-reduction approach; practical for access/democratization discussions. | https://www.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2023.1108396/full","url":"https://www.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2023.1108396/full","provenanceSource":"heuristic","notes":"","paperIds":["paper-020"],"paperSlugs":["020-development-and-implementation-of-a-significantly-low-cost-3d-bioprinter-using-recycled-scrap-material"],"toolIds":["tool-microextrusion-bioprinter"],"toolSlugs":["microextrusion-bioprinter"],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":1},{"id":"asset-cad-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer","slug":"cad-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer","name":"CAD for MEWron (Melt Electrowriting of Nylon-12 Microfibers with an Open-Source 3D Printer)","type":"cad","format":"STL, 3MF","evidence":"Repository holds STL and 3MF part files for the flat- and tubular-collector MEWron builds (checked 2026-11-10).","url":"https://github.com/EPFL-LMIS1/LMIS1_MEWron","provenanceSource":"manifest","notes":"MIT licence; archived at Zenodo 10.5281/zenodo.16941614.","paperIds":["paper-059"],"paperSlugs":["059-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer"],"toolIds":["tool-mewron"],"toolSlugs":["mewron"],"repoIds":["repo-epfl-lmis1-lmis1-mewron"],"repoSlugs":["epfl-lmis1-lmis1-mewron"],"paperCount":1,"toolCount":1},{"id":"asset-cad-modular-microfluidic-systems-cast-from-3d-printed-molds-for-imaging-leukocyte-adherence-to-differentially-treated-en","slug":"cad-modular-microfluidic-systems-cast-from-3d-printed-molds-for-imaging-leukocyte-adherence-to-differentially-treated-en","name":"CAD for Modular microfluidic systems cast from 3D-printed molds for imaging leukocyte adherence to differentially treated endothelial cultures","type":"cad","format":"CAD","evidence":"Published as supplementary information of the article (10.1038/s41598-019-47475-z); Barrier module, flow module and alignment guide as STEP and STL (Supplementary Data 5).","url":"https://static-content.springer.com/esm/art%3A10.1038%2Fs41598-019-47475-z/MediaObjects/41598_2019_47475_MOESM5_ESM.zip","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/060_MOESM5_ESM. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-060"],"paperSlugs":["060-modular-microfluidic-systems-cast-from-3d-printed-molds-for-imaging-leukocyte-adherence-to-differentially-treated-endoth"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-cad-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automated-mi","slug":"cad-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automated-mi","name":"Cad for Principles of computer-controlled linear motion applied to an open-source affordable liquid handler for automated micropipetting","type":"cad","format":"CAD","evidence":"Fully open‑source — CAD files, part lists, firmware, and GUI available online at website | Fully open-source -- CAD files, part lists, firmware, and GUI on project website | Sci Rep PDF/landing + DOI | Sci Rep landing + OTTO site | Open-source automated liquid handler (gantry-style) for micropipetting, e.g., qPCR sample prep | Not a bioprinter, but relevant open automation tool for biofabrication/bioprinting workflows. | Canonical open-source liquid handling robot paper; good baseline against newer modular tools like digital pipette. | https://openliquidhandler.com/ | https://www.nature.com/articles/s41598-020-70465-5","url":"https://openliquidhandler.com/","provenanceSource":"heuristic","notes":"","paperIds":["paper-037"],"paperSlugs":["037-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automated-microp"],"toolIds":["tool-otto"],"toolSlugs":["otto"],"repoIds":["repo-openliquidhandler-com"],"repoSlugs":["openliquidhandler-com"],"paperCount":1,"toolCount":1},{"id":"asset-cad-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","slug":"cad-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","name":"Cad for Sidekick: A Low-Cost Open-Source 3D-printed liquid dispensing robot","type":"cad","format":"CAD","evidence":"all CAD, PCB, firmware, and documentation available on GitHub under an open license | All CAD, PCB, firmware, and documentation on GitHub (open license) | ScienceDirect HardwareX landing | Low-cost open-source 3D-printed armature-based liquid dispensing robot | HardwareX often includes complete design files + BOM; strong ‘open hardware’ fit. | https://github.com/rodolfokeesey/Liquid-Handler | https://www.sciencedirect.com/science/article/pii/S2468067222000645","url":"https://github.com/rodolfokeesey/Liquid-Handler","provenanceSource":"heuristic","notes":"","paperIds":["paper-040"],"paperSlugs":["040-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot"],"toolIds":["tool-sidekick"],"toolSlugs":["sidekick"],"repoIds":["repo-rodolfokeesey-liquid-handler"],"repoSlugs":["rodolfokeesey-liquid-handler"],"paperCount":1,"toolCount":1},{"id":"asset-documentation-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-liv","slug":"documentation-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-liv","name":"Documentation for A Low-Cost, Open-Source 3D Printer for Multimaterial and High-Throughput Direct Ink Writing of Soft and Living Materials","type":"documentation","format":"Documentation","evidence":"CAD files, Github - instructions and software | Wide range of inks/viscosities and curing chemistries, incl. cell-laden biological materials | PMC full text + DOI | Fully DIY (not retrofit) open-source 3D printer for multimaterial, high-throughput direct ink writing | Adjacent platform for living-material printing; include if you want broader DIW-living-materials tooling. | https://github.com/weiss-jonathan/Printess-Low-Cost-3D-Printer | https://advanced.onlinelibrary.wiley.com/doi/epdf/10.1002/adma.202414971","url":"https://github.com/weiss-jonathan/Printess-Low-Cost-3D-Printer","provenanceSource":"heuristic","notes":"","paperIds":["paper-005"],"paperSlugs":["005-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-living-materials"],"toolIds":["tool-printess"],"toolSlugs":["printess"],"repoIds":["repo-weiss-jonathan-printess-low-cost-3d-printer"],"repoSlugs":["weiss-jonathan-printess-low-cost-3d-printer"],"paperCount":1,"toolCount":1},{"id":"asset-documentation-an-open-source-programmable-smart-pipette-for-portable-cell-separation-and-counting","slug":"documentation-an-open-source-programmable-smart-pipette-for-portable-cell-separation-and-counting","name":"Documentation for An open-source programmable smart pipette for portable cell separation and counting","type":"documentation","format":"Documentation","evidence":"manual | https://doi.org/10.1039/c9ra08368e","url":"https://doi.org/10.1039/c9ra08368e","provenanceSource":"heuristic","notes":"","paperIds":["paper-057"],"paperSlugs":["057-an-open-source-programmable-smart-pipette-for-portable-cell-separation-and-counting"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-documentation-automated-liquid-handler-from-a-3d-printer","slug":"documentation-automated-liquid-handler-from-a-3d-printer","name":"Documentation for Automated Liquid Handler from a 3D Printer","type":"documentation","format":"Documentation","evidence":"manual | https://doi.org/10.1021/acs.jchemed.3c00855","url":"https://doi.org/10.1021/acs.jchemed.3c00855","provenanceSource":"heuristic","notes":"","paperIds":["paper-054"],"paperSlugs":["054-automated-liquid-handler-from-a-3d-printer"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-documentation-bio-spec-an-open-source-bench-top-parallel-bioreactor-system","slug":"documentation-bio-spec-an-open-source-bench-top-parallel-bioreactor-system","name":"Documentation for BIO-SPEC: An open-source bench-top parallel bioreactor system","type":"documentation","format":"Documentation","evidence":"manual | https://doi.org/10.17605/OSF.IO/39WSB | https://doi.org/10.1016/j.ohx.2025.e00670","url":"https://doi.org/10.17605/OSF.IO/39WSB","provenanceSource":"heuristic","notes":"","paperIds":["paper-049"],"paperSlugs":["049-bio-spec-an-open-source-bench-top-parallel-bioreactor-system"],"toolIds":["tool-bio-spec"],"toolSlugs":["bio-spec"],"repoIds":["repo-doi-resource-10-17605-osf-io-39wsb"],"repoSlugs":["doi-resource-10-17605-osf-io-39wsb"],"paperCount":1,"toolCount":1},{"id":"asset-documentation-commit-digital-pipette-open-hardware-for-liquid-transfer-in-self-driving-laboratories","slug":"documentation-commit-digital-pipette-open-hardware-for-liquid-transfer-in-self-driving-laboratories","name":"Documentation for Commit: Digital pipette: open hardware for liquid transfer in self-driving laboratories","type":"documentation","format":"Documentation","evidence":"GitHub | Design files and documentation on GitHub | RSC article landing + DOI | Robot-mounted 3D-printed digital pipette for liquid transfer in self-driving labs | Open hardware for accurate liquid transfer in self-driving labs; reports accuracy within ISO 8655-2 permissible error. | https://github.com/ac-rad/digital-pipette-v2 | https://pubs.rsc.org/en/content/articlelanding/2026/dd/d5dd00336a","url":"https://github.com/ac-rad/digital-pipette-v2","provenanceSource":"heuristic","notes":"","paperIds":["paper-013"],"paperSlugs":["013-commit-digital-pipette-open-hardware-for-liquid-transfer-in-self-driving-laboratories"],"toolIds":["tool-commit-digital-pipette"],"toolSlugs":["commit-digital-pipette"],"repoIds":["repo-ac-rad-digital-pipette-v2"],"repoSlugs":["ac-rad-digital-pipette-v2"],"paperCount":1,"toolCount":1},{"id":"asset-documentation-establishment-of-low-cost-laboratory-automation-processes-using-autoit-and-4-axis-robots","slug":"documentation-establishment-of-low-cost-laboratory-automation-processes-using-autoit-and-4-axis-robots","name":"Documentation for Establishment of low-cost laboratory automation processes using AutoIt and 4-axis robots","type":"documentation","format":"Documentation","evidence":"manual | https://doi.org/10.1016/j.slast.2022.07.001","url":"https://doi.org/10.1016/j.slast.2022.07.001","provenanceSource":"heuristic","notes":"","paperIds":["paper-055"],"paperSlugs":["055-establishment-of-low-cost-laboratory-automation-processes-using-autoit-and-4-axis-robots"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-documentation-lusobiomaker-a-low-cost-3d-bioprinter-with-multi-extrusion-and-contour-printing-capabilities-for-thermo-an","slug":"documentation-lusobiomaker-a-low-cost-3d-bioprinter-with-multi-extrusion-and-contour-printing-capabilities-for-thermo-an","name":"Documentation for LusoBioMaker: A low-cost 3D bioprinter with multi-extrusion and contour printing capabilities for thermo- and photocurable hydrogels towards complex tissue fabrication","type":"documentation","format":"Documentation","evidence":"manual | https://doi.org/10.1016/j.bprint.2025.e00425","url":"https://doi.org/10.1016/j.bprint.2025.e00425","provenanceSource":"heuristic","notes":"","paperIds":["paper-048"],"paperSlugs":["048-lusobiomaker-a-low-cost-3d-bioprinter-with-multi-extrusion-and-contour-printing-capabilities-for-thermo-and-photocurable"],"toolIds":["tool-lusobiomaker"],"toolSlugs":["lusobiomaker"],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":1},{"id":"asset-documentation-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer","slug":"documentation-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer","name":"Documentation for Melt Electrowriting of Nylon‐12 Microfibers with an Open‐Source 3D Printer","type":"documentation","format":"Documentation","evidence":"manual | Melt-electrowriting printer built on the open-source MEWron platform (a converted Voron 0.1 3D printer), with a heated flat or cylindrical collector for printing nylon-12 microfibres and tubes. | Extends open-source melt electrowriting beyond low-melting polymers such as PCL to nylon-12, producing well-defined fibres 33–95 µm in diameter on flat and tubular collectors. | https://github.com/EPFL-LMIS1/LMIS1_MEWron | https://doi.org/10.1002/marc.202300424","url":"https://github.com/EPFL-LMIS1/LMIS1_MEWron","provenanceSource":"heuristic","notes":"","paperIds":["paper-059"],"paperSlugs":["059-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer"],"toolIds":["tool-mewron"],"toolSlugs":["mewron"],"repoIds":["repo-epfl-lmis1-lmis1-mewron"],"repoSlugs":["epfl-lmis1-lmis1-mewron"],"paperCount":1,"toolCount":1},{"id":"asset-documentation-open-source-personal-pipetting-robots-with-live-cell-incubation-and-microscopy-compatibility","slug":"documentation-open-source-personal-pipetting-robots-with-live-cell-incubation-and-microscopy-compatibility","name":"Documentation for Open-source personal pipetting robots with live-cell incubation and microscopy compatibility","type":"documentation","format":"Documentation","evidence":"GitHub and authors' website, instructions in paper | GitHub and authors' website; instructions in paper | Nature Comms landing; PHIL GitHub | Compact liquid handling robot for automated pipetting/aspiration during live-cell incubation and microscopy | Shows open hardware that integrates pipetting + incubation + imaging, closer to ‘robot-compatible’ liquid handling. | https://github.com/CSDGroup/PHIL | https://www.nature.com/articles/s41467-022-30643-7","url":"https://github.com/CSDGroup/PHIL","provenanceSource":"heuristic","notes":"","paperIds":["paper-033"],"paperSlugs":["033-open-source-personal-pipetting-robots-with-live-cell-incubation-and-microscopy-compatibility"],"toolIds":["tool-personal-pipetting-robot"],"toolSlugs":["personal-pipetting-robot"],"repoIds":["repo-csdgroup-phil"],"repoSlugs":["csdgroup-phil"],"paperCount":1,"toolCount":1},{"id":"asset-documentation-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","slug":"documentation-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","name":"Documentation for Sidekick: A Low-Cost Open-Source 3D-printed liquid dispensing robot","type":"documentation","format":"Documentation","evidence":"all CAD, PCB, firmware, and documentation available on GitHub under an open license | All CAD, PCB, firmware, and documentation on GitHub (open license) | ScienceDirect HardwareX landing | Low-cost open-source 3D-printed armature-based liquid dispensing robot | HardwareX often includes complete design files + BOM; strong ‘open hardware’ fit. | https://github.com/rodolfokeesey/Liquid-Handler | https://www.sciencedirect.com/science/article/pii/S2468067222000645","url":"https://github.com/rodolfokeesey/Liquid-Handler","provenanceSource":"heuristic","notes":"","paperIds":["paper-040"],"paperSlugs":["040-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot"],"toolIds":["tool-sidekick"],"toolSlugs":["sidekick"],"repoIds":["repo-rodolfokeesey-liquid-handler"],"repoSlugs":["rodolfokeesey-liquid-handler"],"paperCount":1,"toolCount":1},{"id":"asset-documentation-teach-your-microscope-how-to-print-low-cost-and-rapid-iteration-microfabrication-for-biology","slug":"documentation-teach-your-microscope-how-to-print-low-cost-and-rapid-iteration-microfabrication-for-biology","name":"Documentation for Teach your microscope how to print: low-cost and rapid-iteration microfabrication for biology","type":"documentation","format":"Documentation","evidence":"manual | https://github.com/hinderling/fabscope | https://doi.org/10.1039/d5lc00181a","url":"https://github.com/hinderling/fabscope","provenanceSource":"heuristic","notes":"","paperIds":["paper-053"],"paperSlugs":["053-teach-your-microscope-how-to-print-low-cost-and-rapid-iteration-microfabrication-for-biology"],"toolIds":[],"toolSlugs":[],"repoIds":["repo-hinderling-fabscope"],"repoSlugs":["hinderling-fabscope"],"paperCount":1,"toolCount":0},{"id":"asset-documentation-the-biureactor-an-open-source-3d-tissue-research-platform","slug":"documentation-the-biureactor-an-open-source-3d-tissue-research-platform","name":"Documentation for The ‘bIUreactor’: an open-source 3D tissue research platform","type":"documentation","format":"Documentation","evidence":"Published as supplementary information of the article (10.1007/s10439-024-03481-5); bIUreactor user manual (Supplement 4) and detailed methods with drawings (Supplement 2).","url":"https://static-content.springer.com/esm/art%3A10.1007%2Fs10439-024-03481-5/MediaObjects/10439_2024_3481_MOESM4_ESM.pdf","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/044_MOESM4_ESM.pdf. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-044"],"paperSlugs":["044-the-biureactor-an-open-source-3d-tissue-research-platform"],"toolIds":["tool-the-biureactor"],"toolSlugs":["the-biureactor"],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":1},{"id":"asset-firmware-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer","slug":"firmware-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer","name":"Firmware and G-code for MEWron (Melt Electrowriting of Nylon-12 Microfibers with an Open-Source 3D Printer)","type":"firmware","format":"CFG, G-code","evidence":"Repository holds printer configuration files and 12 G-code programs (checked 2026-11-10).","url":"https://github.com/EPFL-LMIS1/LMIS1_MEWron","provenanceSource":"manifest","notes":"MIT licence.","paperIds":["paper-059"],"paperSlugs":["059-melt-electrowriting-of-nylon-12-microfibers-with-an-open-source-3d-printer"],"toolIds":["tool-mewron"],"toolSlugs":["mewron"],"repoIds":["repo-epfl-lmis1-lmis1-mewron"],"repoSlugs":["epfl-lmis1-lmis1-mewron"],"paperCount":1,"toolCount":1},{"id":"asset-firmware-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multima","slug":"firmware-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multima","name":"Firmware for An open source extrusion bioprinter based on the E3D motion system and tool changer to enable FRESH and multimaterial bioprinting","type":"firmware","format":"Firmware","evidence":"Published as supplementary information of the article (10.1038/s41598-021-00931-1); Duet system files and macros (Supplementary Data 3): config.g, tool macros, Duet firmware binaries, Simplify3D profiles.","url":"https://static-content.springer.com/esm/art%3A10.1038%2Fs41598-021-00931-1/MediaObjects/41598_2021_931_MOESM3_ESM.zip","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/009_Slicing_profiles_configuration_files_and_macros. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-009"],"paperSlugs":["009-an-open-source-extrusion-bioprinter-based-on-the-e3d-motion-system-and-tool-changer-to-enable-fresh-and-multimaterial-bi"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-firmware-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automat","slug":"firmware-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automat","name":"Firmware for Principles of computer-controlled linear motion applied to an open-source affordable liquid handler for automated micropipetting","type":"firmware","format":"Firmware","evidence":"Fully open‑source — CAD files, part lists, firmware, and GUI available online at website | Fully open-source -- CAD files, part lists, firmware, and GUI on project website | Sci Rep PDF/landing + DOI | Sci Rep landing + OTTO site | Open-source automated liquid handler (gantry-style) for micropipetting, e.g., qPCR sample prep | Not a bioprinter, but relevant open automation tool for biofabrication/bioprinting workflows. | Canonical open-source liquid handling robot paper; good baseline against newer modular tools like digital pipette. | https://openliquidhandler.com/ | https://www.nature.com/articles/s41598-020-70465-5","url":"https://openliquidhandler.com/","provenanceSource":"heuristic","notes":"","paperIds":["paper-037"],"paperSlugs":["037-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automated-microp"],"toolIds":["tool-otto"],"toolSlugs":["otto"],"repoIds":["repo-openliquidhandler-com"],"repoSlugs":["openliquidhandler-com"],"paperCount":1,"toolCount":1},{"id":"asset-firmware-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","slug":"firmware-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","name":"Firmware for Sidekick: A Low-Cost Open-Source 3D-printed liquid dispensing robot","type":"firmware","format":"Firmware","evidence":"all CAD, PCB, firmware, and documentation available on GitHub under an open license | All CAD, PCB, firmware, and documentation on GitHub (open license) | ScienceDirect HardwareX landing | Low-cost open-source 3D-printed armature-based liquid dispensing robot | HardwareX often includes complete design files + BOM; strong ‘open hardware’ fit. | https://github.com/rodolfokeesey/Liquid-Handler | https://www.sciencedirect.com/science/article/pii/S2468067222000645","url":"https://github.com/rodolfokeesey/Liquid-Handler","provenanceSource":"heuristic","notes":"","paperIds":["paper-040"],"paperSlugs":["040-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot"],"toolIds":["tool-sidekick"],"toolSlugs":["sidekick"],"repoIds":["repo-rodolfokeesey-liquid-handler"],"repoSlugs":["rodolfokeesey-liquid-handler"],"paperCount":1,"toolCount":1},{"id":"asset-firmware-the-biureactor-an-open-source-3d-tissue-research-platform","slug":"firmware-the-biureactor-an-open-source-3d-tissue-research-platform","name":"Firmware for The ‘bIUreactor’: an open-source 3D tissue research platform","type":"firmware","format":"Firmware","evidence":"Published as supplementary information of the article (10.1007/s10439-024-03481-5); Arduino motor-control code (Supplement 3).","url":"https://static-content.springer.com/esm/art%3A10.1007%2Fs10439-024-03481-5/MediaObjects/10439_2024_3481_MOESM3_ESM.pdf","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/044_MOESM3_ESM.pdf. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-044"],"paperSlugs":["044-the-biureactor-an-open-source-3d-tissue-research-platform"],"toolIds":["tool-the-biureactor"],"toolSlugs":["the-biureactor"],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":1},{"id":"asset-pcb-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","slug":"pcb-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot","name":"Pcb for Sidekick: A Low-Cost Open-Source 3D-printed liquid dispensing robot","type":"pcb","format":"PCB","evidence":"all CAD, PCB, firmware, and documentation available on GitHub under an open license | All CAD, PCB, firmware, and documentation on GitHub (open license) | ScienceDirect HardwareX landing | Low-cost open-source 3D-printed armature-based liquid dispensing robot | HardwareX often includes complete design files + BOM; strong ‘open hardware’ fit. | https://github.com/rodolfokeesey/Liquid-Handler | https://www.sciencedirect.com/science/article/pii/S2468067222000645","url":"https://github.com/rodolfokeesey/Liquid-Handler","provenanceSource":"heuristic","notes":"","paperIds":["paper-040"],"paperSlugs":["040-sidekick-a-low-cost-open-source-3d-printed-liquid-dispensing-robot"],"toolIds":["tool-sidekick"],"toolSlugs":["sidekick"],"repoIds":["repo-rodolfokeesey-liquid-handler"],"repoSlugs":["rodolfokeesey-liquid-handler"],"paperCount":1,"toolCount":1},{"id":"asset-protocol-design-of-an-open-source-low-cost-bioink-and-food-melt-extrusion-3d-printer","slug":"protocol-design-of-an-open-source-low-cost-bioink-and-food-melt-extrusion-3d-printer","name":"Protocol for Design of an Open-Source, Low-Cost Bioink and Food Melt Extrusion 3D Printer","type":"protocol","format":"Protocol","evidence":"JoVE landing + DOI | Concrete reproducible build/protocol paper; directly aligned with ‘new open tools’ ask. | https://www.jove.com/t/59834/design-an-open-source-low-cost-bioink-food-melt-extrusion-3d","url":"https://www.jove.com/t/59834/design-an-open-source-low-cost-bioink-food-melt-extrusion-3d","provenanceSource":"heuristic","notes":"","paperIds":["paper-018"],"paperSlugs":["018-design-of-an-open-source-low-cost-bioink-and-food-melt-extrusion-3d-printer"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-schematics-development-and-implementation-of-a-significantly-low-cost-3d-bioprinter-using-recycled-scrap-material","slug":"schematics-development-and-implementation-of-a-significantly-low-cost-3d-bioprinter-using-recycled-scrap-material","name":"Schematics for Development and implementation of a significantly low-cost 3D bioprinter using recycled scrap material","type":"schematics","format":"Schematics","evidence":"GitHub, CAD files, assembly schematics | Frontiers methods article + DOI | Low-cost 3D bioprinter built from recycled scrap metal and off-the-shelf electronics; no 3D printer required to build it | Shows extreme cost-reduction approach; practical for access/democratization discussions. | https://www.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2023.1108396/full","url":"https://www.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2023.1108396/full","provenanceSource":"heuristic","notes":"","paperIds":["paper-020"],"paperSlugs":["020-development-and-implementation-of-a-significantly-low-cost-3d-bioprinter-using-recycled-scrap-material"],"toolIds":["tool-microextrusion-bioprinter"],"toolSlugs":["microextrusion-bioprinter"],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":1},{"id":"asset-software-a-cost-effective-and-open-source-near-field-electrospinning-system-with-a-graphical-user-interface","slug":"software-a-cost-effective-and-open-source-near-field-electrospinning-system-with-a-graphical-user-interface","name":"Software for A cost-effective and open-source near-field electrospinning system with a graphical user interface","type":"software","format":"Software","evidence":"design files available on OSF website | Design files on OSF website | Open-source NFES system with GUI for programmable nanofiber patterning | https://doi.org/10.17605/OSF.IO/GK6PC | https://doi.org/10.1016/j.ohx.2025.e00691","url":"https://doi.org/10.17605/OSF.IO/GK6PC","provenanceSource":"heuristic","notes":"","paperIds":["paper-003"],"paperSlugs":["003-a-cost-effective-and-open-source-near-field-electrospinning-system-with-a-graphical-user-interface"],"toolIds":["tool-low-cost-near-field-electrospinning-nfes-system"],"toolSlugs":["low-cost-near-field-electrospinning-nfes-system"],"repoIds":["repo-doi-resource-10-17605-osf-io-gk6pc"],"repoSlugs":["doi-resource-10-17605-osf-io-gk6pc"],"paperCount":1,"toolCount":1},{"id":"asset-software-a-high-performance-open-source-syringe-extruder-optimized-for-extrusion-and-retraction-during-fresh-3d-bioprint","slug":"software-a-high-performance-open-source-syringe-extruder-optimized-for-extrusion-and-retraction-during-fresh-3d-bioprint","name":"Software for A high performance open-source syringe extruder optimized for extrusion and retraction during FRESH 3D bioprinting","type":"software","format":"Software","evidence":"CAD File, install guide | CAD files and install guide (HardwareX) | PMC full text | High-performance open-source syringe extruder for extrusion/retraction control in FRESH 3D bioprinting | Directly comparable to Replistruder—an open syringe/extrusion tool that enables better bioink handling. | https://doi.org/10.5281/zenodo.4119127 | https://doi.org/10.1016/j.ohx.2020.e00170","url":"https://doi.org/10.1016/j.ohx.2020.e00170","provenanceSource":"heuristic","notes":"","paperIds":["paper-004"],"paperSlugs":["004-a-high-performance-open-source-syringe-extruder-optimized-for-extrusion-and-retraction-during-fresh-3d-bioprinting"],"toolIds":["tool-replistruder-4"],"toolSlugs":["replistruder-4"],"repoIds":["repo-doi-resource-10-5281-zenodo-4119127"],"repoSlugs":["doi-resource-10-5281-zenodo-4119127"],"paperCount":1,"toolCount":1},{"id":"asset-software-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-living-m","slug":"software-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-living-m","name":"Software for A Low-Cost, Open-Source 3D Printer for Multimaterial and High-Throughput Direct Ink Writing of Soft and Living Materials","type":"software","format":"Software","evidence":"CAD files, Github - instructions and software | Wide range of inks/viscosities and curing chemistries, incl. cell-laden biological materials | PMC full text + DOI | Fully DIY (not retrofit) open-source 3D printer for multimaterial, high-throughput direct ink writing | Adjacent platform for living-material printing; include if you want broader DIW-living-materials tooling. | https://github.com/weiss-jonathan/Printess-Low-Cost-3D-Printer | https://advanced.onlinelibrary.wiley.com/doi/epdf/10.1002/adma.202414971","url":"https://github.com/weiss-jonathan/Printess-Low-Cost-3D-Printer","provenanceSource":"heuristic","notes":"","paperIds":["paper-005"],"paperSlugs":["005-a-low-cost-open-source-3d-printer-for-multimaterial-and-high-throughput-direct-ink-writing-of-soft-and-living-materials"],"toolIds":["tool-printess"],"toolSlugs":["printess"],"repoIds":["repo-weiss-jonathan-printess-low-cost-3d-printer"],"repoSlugs":["weiss-jonathan-printess-low-cost-3d-printer"],"paperCount":1,"toolCount":1},{"id":"asset-software-a-robot-assisted-acoustofluidic-end-effector","slug":"software-a-robot-assisted-acoustofluidic-end-effector","name":"Software for A robot-assisted acoustofluidic end effector","type":"software","format":"Software","evidence":"Published as supplementary information of the article (10.1038/s41467-022-34167-y); Program code (Supplementary Data 16): Python control of the Dorna robotic arm.","url":"https://static-content.springer.com/esm/art%3A10.1038%2Fs41467-022-34167-y/MediaObjects/41467_2022_34167_MOESM16_ESM.pdf","provenanceSource":"manifest","notes":"Held in pdfs/supplementary/006_MOESM16_ESM.pdf; no licence header. Link is the publisher's supplementary file itself (ACS: the supporting-information page), verified 2026-09-29; read 2026-09-29.","paperIds":["paper-006"],"paperSlugs":["006-a-robot-assisted-acoustofluidic-end-effector"],"toolIds":[],"toolSlugs":[],"repoIds":[],"repoSlugs":[],"paperCount":1,"toolCount":0},{"id":"asset-software-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automat","slug":"software-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automat","name":"Software for Principles of computer-controlled linear motion applied to an open-source affordable liquid handler for automated micropipetting","type":"software","format":"Software","evidence":"Fully open‑source — CAD files, part lists, firmware, and GUI available online at website | Fully open-source -- CAD files, part lists, firmware, and GUI on project website | Sci Rep PDF/landing + DOI | Sci Rep landing + OTTO site | Open-source automated liquid handler (gantry-style) for micropipetting, e.g., qPCR sample prep | Not a bioprinter, but relevant open automation tool for biofabrication/bioprinting workflows. | Canonical open-source liquid handling robot paper; good baseline against newer modular tools like digital pipette. | https://openliquidhandler.com/ | https://www.nature.com/articles/s41598-020-70465-5","url":"https://openliquidhandler.com/","provenanceSource":"heuristic","notes":"","paperIds":["paper-037"],"paperSlugs":["037-principles-of-computer-controlled-linear-motion-applied-to-an-open-source-affordable-liquid-handler-for-automated-microp"],"toolIds":["tool-otto"],"toolSlugs":["otto"],"repoIds":["repo-openliquidhandler-com"],"repoSlugs":["openliquidhandler-com"],"paperCount":1,"toolCount":1}]}